| Build / PDA | Bit | Region (CSC) | Rating | Android | Date | Download Link |
|---|---|---|---|---|---|---|
| P600UBSDSB1 | — | TCE | v5.1.1 |
2019-03-05 | Download | |
| P600XXSDRJ1 | — | XSG | v5.1.1 |
2019-02-20 | Download | |
| P600XXSDRH5 | — | PHE | v5.1.1 |
2019-02-11 | Download | |
| P600XXSDRI1 | — | XEF | v5.1.1 |
2019-02-08 | Download | |
| P600XXSDRI1 | — | XEO | v5.1.1 |
2019-01-30 | Download | |
| P600XXSDRI1 | — | DBT | v5.1.1 |
2019-01-18 | Download | |
| P600XXSDRI1 | — | ATO | v4.4.2 |
2019-01-17 | Download | |
| P600XXSDRI1 | — | XEH | v4.4.2 |
2019-01-17 | Download | |
| P600XXSDRI1 | — | XEZ | v5.1.1 |
2019-01-17 | Download | |
| P600XXSDRI1 | — | PHN | v4.4.2 |
2019-01-17 | Download | |
| P600XXSDRI1 | — | BTU | v4.4.2 |
2019-01-17 | Download | |
| P600XXSDRI1 | — | LUX | v5.1.1 |
2019-01-17 | Download | |
| P600XXSDRI1 | — | SEB | v4.4.2 |
2019-01-17 | Download | |
| P600XXSDRI1 | — | AUT | v4.4.2 |
2019-01-17 | Download | |
| P600XXSDRI1 | — | EUR | v4.4.2 |
2019-01-17 | Download | |
| P600XXSDRI1 | — | NEE | v4.4.2 |
2019-01-17 | Download | |
| P600XXSDRI1 | — | AUT | v5.1.1 |
2018-09-05 | Download | |
| P600XXSDRI1 | — | PHN | v5.1.1 |
2018-09-05 | Download | |
| P600XXSDRI1 | — | EUR | v5.1.1 |
2018-09-05 | Download | |
| P600XXSDRI1 | — | SEB | v5.1.1 |
2018-09-05 | Download |
Samsung Galaxy Note 10.1 2014 (Wi-Fi) (SM-P600) Firmware Overview
The archive lists 20 official builds for the Samsung Galaxy Note 10.1 2014 (Wi-Fi) across 16 regions (CSC). The newest one is P600UBSDSB1, released March 5, 2019 with Android 5.1.1. Builds cover Android 4.4.2 to 5.1.1, the oldest dating from September 2018.
- Android 5.1.1: 12 builds, latest P600UBSDSB1
- Android 4.4.2: 8 builds, latest P600XXSDRI1
Latest SM-P600 Firmware by Region
The newest build for each region (CSC) code. Not sure which region your phone uses? See the CSC code guide.
| Region | Latest build | Bit | Android | Date |
|---|---|---|---|---|
| ATO | P600XXSDRI1 | — | 4.4.2 | 2019-01-17 |
| AUT | P600XXSDRI1 | — | 4.4.2 | 2019-01-17 |
| BTU | P600XXSDRI1 | — | 4.4.2 | 2019-01-17 |
| DBT | P600XXSDRI1 | — | 5.1.1 | 2019-01-18 |
| EUR | P600XXSDRI1 | — | 4.4.2 | 2019-01-17 |
| LUX | P600XXSDRI1 | — | 5.1.1 | 2019-01-17 |
| NEE | P600XXSDRI1 | — | 4.4.2 | 2019-01-17 |
| PHE | P600XXSDRH5 | — | 5.1.1 | 2019-02-11 |
| PHN | P600XXSDRI1 | — | 4.4.2 | 2019-01-17 |
| SEB | P600XXSDRI1 | — | 4.4.2 | 2019-01-17 |
| TCE | P600UBSDSB1 | — | 5.1.1 | 2019-03-05 |
| XEF | P600XXSDRI1 | — | 5.1.1 | 2019-02-08 |
| XEH | P600XXSDRI1 | — | 4.4.2 | 2019-01-17 |
| XEO | P600XXSDRI1 | — | 5.1.1 | 2019-01-30 |
| XEZ | P600XXSDRI1 | — | 5.1.1 | 2019-01-17 |
| XSG | P600XXSDRJ1 | — | 5.1.1 | 2019-02-20 |
How to Flash SM-P600 Firmware
Put the Samsung Galaxy Note 10.1 2014 (Wi-Fi) into Download Mode, load the BL, AP, CP and CSC files into Odin on a Windows PC and press Start. Pick a build with the same or a higher Bit than the one installed — a lower bootloader binary will be rejected.